Fiber Optic Installation
Base 8 Plug-and-Play Fiber
Providing seamless transition from duplex 10 Gb/s to current and future 8-fiber applications.
Current 40 and 100 gigabit (Gb/s) multimode fiber applications, as well as future 200 and 400 Gb/s multimode and singlemode applications, are based on 8 optical fibers with 4 fibers transmitting and 4 receiving at either 10 Gb/s or 25 Gb/s.
Base 8 systems includes enclosures, modules, adapters, trunk assemblies and jumpers to provide complete end-to-end 8-fiber systems, enabling 100% fiber utilization without the need for conversion cords or modules in 40/100 Gb/s applications and beyond.
LightStack® 8 Ultra High-Density Fiber Enclosure
The LightStack 8 Ultra High-Density Plug-and-Play System offers superior density, port access and cable management in a sleek, modern enclosure. Its high-capacity design handles both traditional 2 mm zipcord and interconnect tight-buffered jumper types.
Modules and adapter plates with superior low-loss performance feature ultra slim design for superior fiber density along with easy insertion and removal from the front and rear of enclosures.
Supports up to 144 LC fibers or 864 MTP fibers in the 1U enclosure and up to 576 LC fibers or 3456 MTP fibers in the 4U enclosure.
Sliding bottom rear divider acts as a cable divider between stacked panels and pushes inward to provide complete rear access to connectivity.
Integrated strain relief and easy-open magnetic door eliminate potential pinch points while swing-open cable management clips offer full access to any jumper.
High-Density FCP3 Fiber Connect Panel
Designed to integrate with high-density FCP3 fiber plug-and-play multimode and singlemode modules and adapter plates, the HD FCP3 panel economically connects, protects and manages up to 96 fibers within 1 rack mount unit.
- Fiber drawer slides to the front and rear for maximum access to fiber connections
- Recessed modules provide a high-capacity jumper management zone that helps maintain proper fiber bend radius
- Designed for simple, snap-in deployment of LC to MTP FCP3 Plug-and-Play modules and LC and MTP adapter plates
Base 8 Assemblies, Trunks, and Jumpers
- Available in low-loss multimode and singlemode, Base 8 MTP trunk assemblies can be quickly routed and connected modules and MTP adapter plates
- Features smaller diameter RazorCore fiber that reduces cable congestion and improves air flow, while enabling just a 2mm MTP jumper for connections to active equipment
- Hybrid assemblies offer an alternative to modules for support of 10 Gb/s and include 4 X 10G Base 8 MTP to LC BladePatch® uniboot assemblies with innovative push-pull latch activation for easy access in tight-fitting areas.
Base 12 Plug-and-Play Fiber
High-performance cabling. High-speed deployment.
Base 12 Plug-and-Play Fiber Systems are factory-terminated and tested and can be deployed up to 90% faster than traditional field-terminated fiber connections. Part of LightHouse™ Advanced Fiber Cabling Solutions, these systems feature a modular design that offers seamless migration from duplex 10 Gb/s to current to 40 and 100 Gb/s applications.
Base 12 Plug-and-Play Fiber Systems include enclosures, modules, adapters, trunk assemblies and jumpers to provide complete end-to-end fiber systems for ultra high-density, high-density and standard-density fiber deployments. Modules and adapters use high-quality ceramic alignment sleeves to deliver tighter tolerances and greater durability than traditional phosphor bronze sleeves for improved fiber-to-fiber mating alignment and wear resistance.
Fiber Optic Cabling Systems
XGLO® & LightSystem®
With a wide range of indoor and indoor/outdoor fiber cable types, cable assemblies, enclosures, jumpers, pigtails and field termination systems, fiber optic cabling systems are ideal for everything fiber—from the backbone to the desk.
XGLO Fiber Optic Cabling Systems utilize bend-insensitive laser-optimized multimode fiber and advanced bend-insensitive singlemode fiber to support the very latest fiber applications. Included in the XGLO family is innovative LC BladePatch® Uniboot Fiber Assemblies that ease access and removal in high-density environments and the LightBow™ Fiber Termination System that significantly reduces termination time and improves performance.
For companies that do not yet require speeds beyond 10 Gb/s, but still need a quality legacy fiber system to support Gigabit Ethernet applications, LightSystem 62.5 multimode fiber cable and assemblies are an ideal solution.
Fiber Splicing Solutions
A wide range of options for single and mass fusion splicing applications
Fiber splicing has increasingly become a popular field termination method and the best way to transition from outside plant 250µm cable to indoor 900µm cable. With a wide range of splicing enclosures, trays and singlemode and multimode modules and pigtails, fiber splicing solutions support all your single and mass fusion splicing needs.
Passive Optical Network (PON) Fiber Cabling Solutions
Modular, cost-effective, high-performance solutions for distributing voice, video and data to the desktop.
Capable of distributing voice, video and data to the desktop over one single mode fiber, PONs offer the benefit of extended transmission distances, as well as easy deployment and reduced pathway and conduit space. Enterprise Passive Optical Network (PON) Fiber Cabling Solution is a modular, cost-effective, high-performance solution that improves the modularity, flexibility and management of PONs.
Our Fiber Cabling Solution offers versatile splitter installation to support a variety of PON applications and includes cabling, assemblies, connectivity, cable management and multiple enclosures options that enhance enterprise PONs from the OLT to the work area equipment.